Before you begin
- A resin matched to the casting depth
- Clean dry tools and compatible forms
- Accurate measuring equipment
- A sample log for the working conditions
Control the starting conditions
Use the temperature and humidity range given for your resin. Keep tools, forms and inclusions dry. Check whether porous inclusions need a compatible sealing process and trial it on a spare sample first.
Measure and mix with care
Follow the exact ratio and measuring basis. Mix as directed while reaching the cup walls and base. Do not change the hardener quantity to alter the cure speed; that changes the formulation rather than correcting a process issue.
Keep the pour within its limits
Observe the recommended batch size and depth. If a multi-layer process is needed, use the specified recoat window. Use pressure, vacuum or heat only when the resin and equipment suppliers expressly support that method.
Change one thing at a time
After the required cure, compare where defects appear: at inclusions, along edges or throughout the piece. Record the conditions and alter one variable for the next test. This makes the result more useful than changing several steps at once.
TAKE THIS WITH YOU
A repeatable process is more valuable than a quick fix for one pour.
For material processing, use the current TDS and SDS for the exact product you select. Mixing ratios, cure conditions and suitable applications vary by formulation.



