Before you begin
- A clean master with a defined finished surface
- A compatible silicone system and its TDS/SDS
- A suitable mold box
- Any sealer or release agent required by that system
Inspect the master
Check the surface, fine details and undercuts. Every imperfection can transfer into the mold. Decide which faces need the best finish and how the finished casting will be removed without stressing thin features.
Choose the mold structure
A simple open shape may suit a one-part mold, while more complex geometry can need a multi-part approach. Plan the opening, support and alignment before choosing the box dimensions. Confirm wall thickness with the silicone supplier.
Test compatibility before the main pour
Some master materials, coatings and contaminants can interfere with specific silicone curing systems. Run the supplier’s recommended small compatibility test. Use a sealer or release only when it is suitable for the chosen materials.
Follow one documented system
Use the silicone’s exact ratio, measuring basis, mixing method and cure schedule. Check whether degassing is recommended for that formulation. After curing, inspect the mold and trial it with the intended casting material before repeating production.
TAKE THIS WITH YOU
The master, silicone and casting material need to work together as one system.
For material processing, use the current TDS and SDS for the exact product you select. Mixing ratios, cure conditions and suitable applications vary by formulation.



