3 gal Deep Pour Epoxy Resin Kit for River Tables
A slow-curing epoxy resin kit for river tables, wood projects and dried-flower preservation.
- MOQ
- 50 sets
- Kit Size
- 3 gal
- Mix Ratio (A:B)
- 2:1 by volume
Kit contents: Part A resin: 2 × 1 gal; Part B hardener: 1 gal.
Ask about samples, private label packaging, and SDS or TDS availability when you request a quote.
Description
ArFlair 3 gal deep pour epoxy resin kit for river tables, wood art, and thick decorative castings.
- Pack and options: Two 1 gal jugs of Part A and one 1 gal jug of Part B.
- Product features: Listed mixed viscosity is 1,000 cP, with up to 80 minutes of working time and Shore D 85 cured hardness.
- How to use: Mix A and B 2:1 by volume. Confirm the listed 2–4 inch pour guidance against the current technical sheet, mold dimensions, and batch size.
- Wholesale inquiries: Share your order quantity and any packaging or private label requirements when requesting a quote.
Customer Support
- WhatsApp:
- Email: sales@arflairresin.com
Come watch our TikTok
Discover resin craft ideas and finished creations. Ask our team for the current ArFlair TikTok profile.






Product Specifications
| Category | Deep Pour Resin |
|---|---|
| Kit configuration | Part A: 2 × 1gal; Part B: 1 × 1gal |
| Total kit size | 3gal |
| Mixing ratio | A:B = 2:1 by volume |
| Mixed viscosity | 1000 cps |
| Working time | Up to 80 minutes; depends on temperature and batch volume |
| Hardness | Shore D 85 |
| Pour-depth guidance | 2–4 inches; subject to the current technical guide and project conditions |
| Cure profile | Slow curing; request the product-specific schedule |
Depth, working time and curing depend on temperature, batch volume and mold geometry. Follow the current product technical guide. Flow comparisons are illustrative, not laboratory test results.
Product Questions
What is included in the 3gal kit?
The kit contains three 1gal jugs: two jugs of Part A resin and one jug of Part B hardener. Total contents are A 2gal + B 1gal. MOQ is 1 set.
How do I measure the 2:1 ratio?
Measure two equal volumes of Part A resin for every one volume of Part B hardener. For example, 200mL A requires 100mL B. Mix thoroughly, scraping the sides and base. Do not use a weight ratio unless the current product instructions explicitly provide one.
What can I make with this deep pour resin?
Discuss river tables, wood-and-resin art, dried-flower preservation and thick decorative castings with our team. Use fully dried inclusions and confirm wood preparation, sealing and mold suitability in the technical guide.
How deep can I pour at one time?
The supplied specifications show 2–4 inches, subject to temperature, batch volume and mold geometry. Confirm the permitted layer depth and mixed quantity in the current TDS for your exact project before pouring.
What are the working and curing times?
The listed working time is up to 80 minutes, depending on conditions. This is a slow-curing system; ask for its demolding and full-cure schedule rather than using the timing of a 1:1 coating or casting kit.
Can I order private-label packaging and technical documents?
Contact sales@arflairresin.com or WhatsApp with the product name, quantity and packaging requirements. Request the current instructions, TDS and Part A / Part B SDS for this 3gal 2:1 deep pour kit.
PRODUCT INQUIRY
Get a Factory-Direct Quote for 3 gal Deep Pour Epoxy Resin Kit for River Tables
Tell us your preferred size, order quantity and packaging requirements. Our team will help you confirm product options and prepare a quotation.
PRODUCT ADVANTAGES & TECHNICAL OVERVIEW
Why Source From ArFlair Factory?
🌊 Deep Pour up to 2-4 Inches
Special slow-curing exothermic control allows thick single pours without boiling, cracking, or thermal runaway.
💧 Water-Thin Viscosity (350 cP)
Super low viscosity allows natural bubble release without vacuum degassing equipment.
🪵 Maximum Wood Adhesion
Deeply penetrates live-edge wood pores for an unbreakable resin-to-wood mechanical lock.
💎 Crystal Diamond Clarity
Optically pure transparency that beautifully highlights wood grain, embedded objects, and metallic pigments.
Detailed Technical Specifications
| Parameter | Technical Specification |
|---|---|
| Mix Ratio | 2:1 by Volume (2 Parts Resin : 1 Part Hardener) |
| Kit Size | 3 Gallons (Part A: 2 × 1 gal jugs; Part B: 1 × 1 gal jug) |
| Viscosity (25°C) | 350 - 550 cP (Ultra low viscosity) |
| Working Time | 4 - 6 Hours (Long open time for precision color swirling and embedding) |
| Demold / Full Cure | Demold: 36 - 48 hours; Full hardness cure: 72 hours |
| Maximum Single Pour Depth | 2 to 4 inches (50 - 100 mm) depending on ambient room temperature |
| Shore D Hardness | 83 - 86 Shore D |
| Recommended Ambient Temp | 20°C - 24°C (68°F - 75°F) |
Wholesale & Private Label FAQ
Q: How do I avoid overheating during deep casting?
A: Keep the ambient room temperature between 20°C-24°C (68°F-75°F) with good ventilation. For massive pours exceeding 4 inches, pour in multiple stages allowing the first layer to cool before the next.
Q: Do you offer bulk packaging in drums or IBC totes?
A: Yes, in addition to 3-gallon kits, we supply 200 kg steel drums and 1,000 kg IBC totes for industrial furniture manufacturers.


