BRING YOUR NEXT RESIN COLLECTION TO LIFEWholesale & private label projects ↗
ArFlairArFlairresin
GET QUOTE

1 kg Clear Epoxy Resin Kit for Jewelry & Keepsakes

A 1kg two-part epoxy resin kit for arts, handmade jewelry and decorative mold casting. Mix equal volumes of resin and hardener for a clear, self-leveling finish.

MOQ
50 sets
Kit Size
1 kg
Mix Ratio (A:B)
1:1 by volume

Kit contents: Part A resin: 500 g; Part B hardener: 500 g.

SIZE
Description

ArFlair 1 kg clear epoxy resin kit for resin jewelry, botanical pendants, and decorative keepsakes.

  • Pack and options: 1 kg combined net weight of Part A resin and Part B hardener.
  • Product features: A glossy, self-leveling finish keeps dried flowers and decorative inclusions visible.
  • How to use: Mix equal volumes of A and B. Typical working time is 30–40 minutes; allow 8–24 hours to cure, depending on conditions.
  • Wholesale inquiries: Share your order quantity and any packaging or private label requirements when requesting a quote.
Customer Support
Come watch our TikTok

Discover resin craft ideas and finished creations. Ask our team for the current ArFlair TikTok profile.

ArFlair — Epoxy resin for creative projectsArFlair — Mix equal volumes of Part A and Part BArFlair — Epoxy resin kit specificationsArFlair — Measure, mix and pour guideArFlair — Resin coaster, tray and jewelry applicationsArFlair — Prepare a safe resin craft workspace

PRODUCT SPECIFICATIONS

Know your product options.

Typical technical data for OS-820AB. Working and curing times depend on the stated test conditions; verify suitability in a small trial.

1 kg Clear Epoxy Resin Kit for Jewelry & Keepsakes specifications
Product1 kg Clear Epoxy Resin Kit for Jewelry & Keepsakes
Reference formulationOS-820AB
Total net weight1kg (Part A + Part B combined)
Pack contents1 bottle of Part A resin + 1 bottle of Part B hardener
Mixing ratioA:B = 1:1 by volume; not by weight
Working timeApprox. 35 minutes at 25°C (50g test batch)
Room-temperature curing25°C × 24 hours (2g test sample, per TDS)
Part A viscosity at 25°C1600 cP
Part B viscosity at 25°C1200 cP maximum
Shelf life6 months at 25°C under the storage conditions in the TDS
StorageKeep tightly sealed in a cool, dry place, away from sunlight, heat and moisture
ApplicationsArts and crafts, handmade jewelry and decorative mold casting
MOQ1 set
CustomizationPrivate-label packaging available for discussion

Product Questions

What is the minimum order quantity?

The minimum order for the 1kg kit is 1 kit. For other pack sizes or custom-branded orders, contact our team to confirm the minimum quantity and quotation.

What is included in the 1kg kit?

The kit contains one bottle of Part A epoxy resin and one bottle of Part B hardener, with a combined net weight of 1kg.

What is the mixing ratio by volume?

Mix Part A resin and Part B hardener at a 1:1 ratio by volume. Measure equal volumes, then mix thoroughly, scraping the sides and bottom of the container. Do not substitute a 1:1 weight ratio.

How long are the working time and curing time?

The typical working time is 30–40 minutes; the TDS gives approximately 35 minutes at 25°C for a 50g batch. Typical curing time is 8–24 hours, depending on temperature, batch size and project geometry. The TDS specifies 24 hours at 25°C for a 2g test sample. Follow the current TDS for your selected formulation; working time and curing time are different stages.

Can I use it for coatings, coasters and flower preservation?

Discuss your decorative coating, coaster or dried-flower preservation project with our team so we can confirm the appropriate formulation. Use completely dried flowers, test compatibility on a small sample, and confirm the recommended pour depth and layer thickness before casting. Large or deep flower-preservation projects may require a different formulation.

What packaging sizes and private-label options are available?

Packaging options include 1kg, 1gal, 2gal, 5kg, 10kg, 50kg and 200kg. Custom branding, label artwork and packaging can be discussed. Tell us your required pack size, quantity and branding requirements so we can confirm the configuration and quotation. Gallon sizes are volume specifications; kilogram sizes are weight specifications.

How can I obtain instructions, the TDS and the SDS?

Request the product instructions, Technical Data Sheet (TDS) and Safety Data Sheet (SDS) for your selected formulation from our team. Email sales@arflairresin.com or contact us on WhatsApp. Include the product name and pack size, and request the Part A and Part B SDS before use.

PRODUCT INQUIRY

Get a Factory-Direct Quote for 1 kg Clear Epoxy Resin Kit for Jewelry & Keepsakes

Tell us your preferred size, order quantity and packaging requirements. Our team will help you confirm product options and prepare a quotation.

Reference files stay in your browser. Attach them in WhatsApp when you contact our team.

Review your details, then open WhatsApp to send your inquiry.

LET’S SHAPE YOUR PROJECT

Your project brief.

Prepare your project requirements, then share the downloaded brief with our sales team to discuss quotes and technical documents.

Your privacy.

Quote requests are not sent automatically. When you choose WhatsApp, your entered details are passed to WhatsApp in a prepared message for you to review and send. Reference files remain on your device and must be attached in the chat. Downloaded briefs stay on your device. Discuss confidentiality with the sales team before sharing sensitive design files.

THE ArFlair COLLECTION

What are you looking for?

Explore resin, molds, pigments and DIY kit options.

NEW ARRIVAL / SEASONAL IDEAS

Fresh inspiration for your range.

Explore our Halloween and Christmas craft collections.

ArFlair 1 kg Clear Epoxy Resin Kit for Jewelry & KeepsakesGet a Free Quote